AMPLIFIERS & RECEIVERS - Page 267
By admin
•
April 14, 2016
•

The 22 (pronounced “tu-tu”) is a beautifully designed hybrid tube amplifier from EK Japan. In addition to its stunning looks (which were put designed by Koichi Futatsumata), the…
By admin
•
April 14, 2016
•

Experience the excitement of discovery in hearing more from your favorite recordings than ever before! The brand new Classic Sixty is conrad-johnson’s best value ever in a pure…
By admin
•
April 14, 2016
•

Focus function: 1, Powered by USB or Battery, you can use the headphone and charging battery at same time. (When you goes outside. Use the power bank to…
By admin
•
April 13, 2016
•

output power:8W×2 frequency response:20Hz–25KHz Total harmonic distortion(THD): < 1%(1kHz) Input sensitivity: 500mV--2000mV input impedance:100KΩ output impedance:4Ω,8Ω SNR:88dB size:370×250×200mm NW:16Kg appr Front tube: 6N8P ×2 back power tube:300B×2 rectifierSale...
By admin
•
April 13, 2016
•

Introduction This tube preamp is based on the famous Matisse circuit, some modifications have been applied to expand the range of frequency, it sounds smooth and punchy. It’s…
By admin
•
April 13, 2016
•

HIGH END – HARTUNG OTL-2-50 Real audio pleasure. Made in Germany. Hartung – 50 Watt OTL MONO-BLOCK amplifiers. Item ships from Hartung Labs-Leipzig, Saxony, Germany. Engineered to perfection…
By admin
•
April 13, 2016
•

Specifications: Tube: 6AD10 Power Output: 3.5W+3.5W @ 8 ohms Frequency Response: 30-40Khz (+-1db) Input Sensitivity: 500mV Signal-to-Noise Ratio: -80dB / 3.5W Residual Noise < 0.5mV AC Input AC...
By admin
•
April 12, 2016
•

The Qinpu A-6500 is a compact, affordable tube amplifier designed to drive quality headphones or bookshelf/desktop speakers in the home. Updated and improved from the previous model A-6000MKII,…
By admin
•
April 12, 2016
•

Caution : the product don’t have plastic cover. Please click:http://www.amazon.com/dp/B00A7IZN70 to buy the one with plastic cover Output Power:45W + 45W (8ohm) Frequency Response:5Hz — 54kHz (-2dB) Signal/Noise…
By admin
•
April 12, 2016
•

Technical Specifications: Driver tubes – 6J1 Power tubes – 6P1 Power Output: 3W+3W @ 8 ohms Frequency Response: 30-40Khz (+-1db) Input Sensitivity: 500mV Signal-to-Noise Ratio: -80dB / 3W…